I just set up my new box 360 premier svlan ,but don't works . ip looks ok ,load up new file . no service or scrambled say. thanks

Try a hard boot first and see if picture comes in if not follow these steps:

How-To Load SVLan for SV360_Premier

The Sv Lans Bins must only be loaded with a SV Lan Dongle Attached to the Receiver .

Do not attempt to load it with an I-Hub or Newlink for it will not take.

Loading this bin on your SV 360 Premier.

1) Ensure that your receiver is set up and and you have picture on Ch 101
2) Plug in the SV Lan to the Receiver
3) Connect Ethernet cable to SV Lan Port and to the Router
4) Download, Extract and Copy this bin to the USB Stick
5) Turn on the Receiver
6) Plug in USB Stick and click on SV Lan Bin
7) Click File to upgrade and do not interrupt Operation.
8) When it asks to reboot, do so.
9 Turn to CH 200

Set Up the Ip Config.

1) Click on the IP Config
2) Set Private server to NO
3) Set to DHCP
4) Enter S/N from the Label on the SV Lan Casing
5) Exit and Click Yes to save

Wait for picture on CH 200.

How to set up the SVlan

Go into the menu first and write down all your settings....
How to set up SVlan if you have SV Lan on SVP.
Do a Factory Reset
Then aSys Clean
Load the bin
Scan Sats.
Shut Power, remove SV Lan, Turn on Power, Turn off Power
Plug SV Lan back in, Open IP Config
Enter the serial number from lable to IP Config. It's new
Do hard reboot. Watch TV

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

I did all about it and still the some chnl. 101 is on . I don't understand when you say A System clean I don't find it. Thanks

That is factory file, you can download it here - Sonicview SV-360 Premier Factory Firmware June.23.2010

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

I found the file A system clean . But maybe I don't need it . Thanks

You shouldn't need it if your SVLan is brand new, normally all you have to do is load the latest file, reboot and set up Ip Config.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.