|
 |
 |
 |
 |
 |
 |
 |
ChatBox Sonicview Conaxsat Nanosat Viewsat i-Link DreamboxLimesat Topsat AzBox Satzen X-Factor |
 |
 |
|
|||||||
| Sonicview Discussion Post your questions, comments or concerns here. |
 |
|
|
LinkBack | Thread Tools | Rate Thread |
03-10-2011, 01:50 PM
|
||||
|
||||
Now I don't have a SV but I think this should work if you follow the directions...
1) Do a little reading on your receiver so you will be familiar with it. 2) Do a factory default. ( if you have your receiver set up, write your settings down first...) 3) Go into the menu and redo your settings and scan for channels. You should be able to get channel 101 if you did all this right. 4) Ensure that your receiver is set up and and you have picture on Ch 101 if pointing at 119W. 5) Plug in the SV Lan to the Receiver 6) Connect Ethernet cable to SV Lan Port and to the Router, turn receiver off from the back. 7) Download, Extract and Copy this bin to the USB Stick:Latest FTA File for receiver 8) Turn on the Receiver 9) Plug in USB Stick and click on SV Lan Bin 10) Click File to upgrade and do not interrupt Operation. 11) When it asks to reboot, do so. 12)Turn off the receiver from the back switch, router off, modem off and then turn back on, starting with the modem, then router and then the receiver, waiting a minute for each to boot up. If you haven't done the IP config, then you need to do it now and add the serial number. Set Up the Ip Config. 1) Click on the IP Config 2) Set Private server to NO 3) Set to DHCP 4) Enter S/N from the Label on the SV Lan Casing (all o's are zero, do not use the lower case o) 5) Exit and Click Yes to save Turn to CH 200, leave it there, don't touch anything, should come on shortly.. Good luck.!!!!
__________________
All posts are for informational and educational purposes only. Last edited by eloans1; 03-10-2011 at 05:29 PM. 
|
|
03-10-2011, 02:42 PM
|
||||
|
||||
You can go into the menu and do a "sort by sid"
When you get that message just do a hard reboot and put on channel 200. Did you follow my directions without missing or skipping a single step? Which file did you load.?
__________________
All posts are for informational and educational purposes only.
|
|
03-10-2011, 02:57 PM
|
|||
|
|||
|
svlan_V43 bin. Premiere_svlan_special_v99.rom ,and svlan_usb_wiznet.bin. as far as the channels go switching to echostar package should fix that problem but it doesnt. Im i using the right files?
|
|
03-10-2011, 03:54 PM
|
||||
|
||||
|
Why did you use those files? v43, v99 file, wiznet bin are for converting the Ihub to a SVLAN??
You may need to do a system clean and start over.
__________________
All posts are for informational and educational purposes only. Last edited by eloans1; 03-10-2011 at 04:23 PM.
|
|
03-10-2011, 04:41 PM
|
||||
|
||||
|
Post which model receiver are you using and I will post file link.
__________________
All posts are for informational and educational purposes only.
|
|
03-10-2011, 04:49 PM
|
||||
|
||||
|
You can try this file first if you want and if not working load the factory file first then load this file again:Sonicview 360 Premier Svlan FTA Fix Jan.25.2011
You might need to load this factory file:Sonicview SV-360 Premier Factory Firmware June.23.2010
__________________
All posts are for informational and educational purposes only.
|
|
| Bookmarks |
| Thread Tools | |
| Rate This Thread | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Svlan Files Explained | Ekim | Sonicview Discussion | 0 | 01-25-2011 06:42 AM |
| How To Convert to SVLan Files & Instructions | FTA PRO | Sonicview Discussion | 0 | 01-21-2011 06:53 PM |
| How to convert iHub to Svlan | FTA PRO | Sonicview 8000 HD Instructions | 0 | 01-21-2011 06:16 PM |
| Premier How to Convert to SVlan | Ekim | Sonicview 360 Premier Instructions | 0 | 01-05-2011 06:12 AM |
| Sonicview 360 Elite svlan FTA Fix Dec.30.2010 | FTA PRO | Sonicview 360 Elite FTA Fix Files | 0 | 01-02-2011 05:41 PM |
 |
 |
