Hi, I have problems with the wiznet I don`t know if I have to keep connected the ihub and use a usb to usb cable to transfer the data or disconected the ihub and use the null cable because when I open the wiznet it dosent recognize nothing in my pc.I appreciate your answer and your help.Thanks.

When running Wiznet your i-hub has to be connected and receiver turned on, then load file v43 using Wiznet after that close Wiznet and load other files using USB stick.You have files and instructions here - How To Convert to SVLan Files & Instructions

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Thanks a lot.

Extract the latest bin to your USB stick and write down the Serial Number before beginning, make sure you do not use the letter "o" in place of the number zero "0".


1) Plug in the I-hub or Newlink or Svlan adapter to the receiver.

2) Plug the Cat5 cable from adapter to Router

3) Load this Bin via the USB and reboot when it asks you to

4) You may see Updating Image but you will see "Network Adapter Connected" Message

5) Wait for a Proess Bar on the top left

6) Once you have an Image

7) Click Menu, Network

8) Set to DHCP

9) Scroll to SN and delete all the YYYYYY

10) Enter SN

11) Exit and save

12 Menu Dish Settings and set up your sats

13) Scan only when you have proper Sat Lock.

14) Click on CH 101, you must have a picture, if not, re-check your Dish Settings and S and Q signals

12) you have picture on Ch 101, Click on CH 200 or CH 300 and wait for Picture.

If no Picture please start your own thread and ask for assistance posting what you have done and what you are having problems with.

__________________
All posts are for informational and educational purposes only.