I just rec my immediate upgrade svlan serial code # , and try to setup. but could not get in the bottom left of screen(0-9) Alphabet ok could someone
help pl thanks

I think I kno wat ut talkin bout it wont change to dark shade of numbers and or letters....when the server is dwn it wont work,but once da server is back up and runnin u will be able then to work...But once da its back up u should not have any problemooo....hope it helps u so u don't get fustraighted...wait onda server would be my guess....

Use your remote for numbers keypad for letters.

__________________

Re: Latest File for your model of receiver.--------------------------------------------------------------------------------

This is the only Bin most will need.

For New Install and To Convert.

1)Extract the latest bin file to your USB stick and write down the Serial Number before beginning, make sure you do not use the letter "o" in place of the number zero "0".

2)Insert the USB stick before turning on the power to your receiver.

3) Load the latest bin file via the USB and reboot when it asks you to, then power off receiver from the rear switch.

4) Plug in the I-hub, Newlink, Svlan or Wizhub adapter to the receiver.

5) Plug the Cat5 cable from adapter to Router and turn on receiver.

6) You may see Updating Image but you will see "Network Adapter Connected" Message

7) Wait for a Process Bar on the top left

8) Once you have an Image

9) Click Menu>Network Settings

10) Set to DHCP

11) Scroll down to SN and delete all the YYYYYY

12) Enter SN

13) Exit and save

14) Menu Dish Settings and set up your sats

15) Scan only when you have proper Sat Lock.

16) Click on CH 101, you must have a picture, if not, re-check your Dish Settings and S and Q signals

17) you have picture on Ch 101, Click on CH 200 or CH 300 and wait for Picture.

If no Picture please start your own thread and ask for assistance posting what you have done and what you are having problems with.

--------------------------------------------------------------------------------

__________________
All posts are for informational and educational purposes only.