When I turn on my sonicview 8000, just getting BOOTING.
Any help

Did you try a hard boot off and on via rear switch?

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

If a hard boot doesn't work for you take a look at this link - How to fix a Sonicview 8000 HD If It Gets "Stuck on Booting"

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Booted from back about 10 times, disconnected cat 5 cable
and booted (Nothing). Will try what you sugested.

Didn't work. Do you think it's a door stopper.

No i don't think it's a door stopper, if you follow all the steps carefully it should work for you.Try this again:

Here is the steps to revive your receiver if it gets "stuck on booting" where the display stays on booting and doesn't complete and reboot.

1. Do a clean FAT32 format on your USB stick.
2. Load the latest update bin file to the USB stick.
3. Turn the rear power switch on the receiver OFF.
4. Plug your USB stick into the receivers USB port.
5. Now do a forced load by pressing and holding the MENU key on the front panel of the receiver ( not the remote ) and at the same time switch the rear power switch ON. Continue to hold the MENU button until you see "LOAD USB" on the front panel then release Menu button. It will then boot from the USB stick.


IMPORTANT NOTE: When using this step, please make sure there are nothing else in the device besides the latest bin file (That is the reason behind the clean FAT32 reformat).

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

No its not a door stopper yet.Try and load the factory file with pc sv loader and null cable to receiver.

lol sorry Pro

__________________

Please show me thefiles, whatbootloader do i use.

You can download the loader here - SV8000HD Loader Program

And factory file here- SV_8000HD Factory File June.23.2010

You have to connect your receiver to your PC and use null cable when loading files using loader.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

now i have no lites.