Your ihub is what is referred to as "Bricked".The good news is that the Wiz program sees the hub.
You need to start by trying to load the 1.4 hub file located here with the Wiz program.Extract the file and have it ready to use with Wiz.
http://www.ftafire.com/attachments/s...ihub_v_1_4.zip
If you get the file to load, locate the Wiz file 2.1 and or 2.2 and load those too. From there, load the svlan24 file to your box with the hub disconnected from the box.When prompted to "Reboot now" answer "no" and shut the box off from the rear.Reconnect the hub,restart and wait to see the "Updating" message.When its done, Reboot again and you should now have an SVlan/Wizhub.

Post what you learn and good luck,
Sp0iler

still No Service or Scrambled.

also still getting the 82.9 in my version box.

Did you see version 82.9 on wiznet tool with receiver connected to router or straight to pc lan port?

__________________

now i saw 1.4 in the version window.

That is good, now follow Spoiler's instruction above to convert your i-hub.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

So, you now have the "Network settings" menu in the box menu. Thats great.
With the Wiz program, What version now shows for your Svlan/Wizhub ??
You should be at version 4.12. Confirm that before going further.
Next, copy your number and paste it in "Textpad" or "Notebook". This will help show you the true number.Some letters and numbers look alike.I's look like 1's and o's might look like 0's.The copy and paste method will show you the correct number.
Next, you can send me or another mod your number in a PM and we can test the number for you.
I'm not aware of any downtime for AJG last night, at this time.
Confirm you have pic and sound on channel 101.This is a free channel and open to all, all the time.

Sounds like your very close now