bryonjohnson7 did you put fix on after you did the channel list file? If not you need to do this in the following order below. With your remote, do a factory default and follow step after step below. Let us know if your up and running after last step, remember let receiver auto roll

1. First you must download and unzip (extract) the yymmdd.pgm from the Files section. (this means the fix, here is the link, download it to desktop and unzip it and leave it there for now -

http://www.ftaprofessionals.tv/views...ement-fix.html)

Now if you want channel list as well, go get it and save it to desktop too and unzip it too. Link below

http://www.ftaprofessionals.tv/views...119-129-a.html

2. Insert your Memory Stick in your PC and either transfer the extracted
.pgm file from your computer or you can extract it directly to your USB
drive.

You can do channel list first and then your fix after that.

3. Insert the USB drive into your STB. (either rear or front - just make
sure you enable REAR USB or FRONT USB in the menu - under USER SETTING -
OPTION) If the STB doesn't recognize your flashdrive, make sure the drive
is formatted FAT32.

4. In the Main Menu select System information and press OK
Select Receiver Upgrade and press OK
Go down to the bottom of the window, select USB and press OK
A new window opens with files. Select your pgm file and press OK.

Remember that if you are adding channel list and then fix, you will have to repeat
step 4 above for both of those files to be added to your receiver.

****************************** ********
VERY IMPORTANT. DO NOT TURN THE POWER OFF
Let the receiver finish and reboot on its own!!!
****************************** ********

5. Press Menu key, Select Installation and press OK
Select Antenna Setup and press OK
Select your Sat.
Here if you have a Diseqc switch enter the port #, Motor or Legacy SW
(appropriate to your setup).
Press Exit and select Yes for saving the settings
Your back to Antenna Setup screen

6. Set up each Sat you have by repeating step 5

meaning that after you finish with setting up 110 then you go through step 5
again for 119 and remember change tp freg. 12239 for 119.

7. Channel Scan (also from Installation menu)
Select Auto Scan
Press OK
You can change the sat you want to scan by using the F1 button and
selecting the sat to scan. Press exit to get out of the sat selection
menu.
Select Scan Start and press OK. Do this for all the Sats you have.

8. Exit and save the settings

9. Wait for Autoroll and watch TV


Let us know if this get you up and running

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................