How To Flash Your VS‐Pro By USB

Your USB Flash Drive Must Be Formatted in FAT32.
If Your VS‐Pro Does Not Recognize Your Flash Drive, Try A Different Flash Drive.

#1 ‐ Copy .all file to flash drive ‐ make sure this is the only file on your flash drive

#2 ‐ Menu‐‐>>Record‐‐>>USB Port Select ‐ Choose Front Side, Then press "Exit"

#3 ‐ Insert flash drive in to front USB port. Wait for message to appear on screen recognizing flash drive ‐ press "OK".

#4 ‐ Menu‐‐>>System Information‐‐>>Software Update List (Not Update Software) ‐ you will now see the .all file, make sure it is highlighted and press ok. STB will now begin to be flashed ‐ you will see a message "Writing software, do not power off.

#5 ‐ When flashing is complete the VS‐Pro will reboot & you will see a message "Remove flash drive, press any key". Do not press any key ‐ just remove the flash drive. VS‐Pro will reboot again and flashing is complete.

Menu‐‐>>System Information‐‐>>Product Information to confirm that software has been written.