Loading your BIN using Null cable:

• Connect serial cable (NULL) to PC>STB
• Open up Loader of choice (PVR-Loader 1.1 or Loader2)
• Click on Tool>Configuration>Com port (Default is com 1)
• Click on Open File
• Click on PC>STB (Notice the progression bar in loader)
• Turn the power in the back ON
• Wait for Loader say Completed. Then on box LCD front panel screen say I.N.S.T>END>0000 or until clock count to 0.001
IT IS VERRY IMPORTANT. DO NOT TURN THE POWER OFF TO SOON
• Turn the power OFF in front and power OFF in back
• After downloading the “BIN”, unhook NULL cable from PC>STB
• Connect all the cables to your box/TV
• Turn the power ON in the front and back
• Press Menu key
• Select Installation and press OK
• Select Antenna Setup and press OK
• Select your Sat.
• Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
• No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
• Press Exit and select Yes for saving the settings
• Your back to Antenna Setup screen
• Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
• Select Auto Scan
• Press OK
• You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
• You don’t change nothing here, go down and select Scan Start and press OK
• You do this for all the Birds (Sat.) you have
• Wait for Autoroll and watch TV

Most problems are caused by human error. follow this procedure and you won't have problems. Read carefully and use at your own risk. Do this with EVERY bin you load. If you are using the vs ultra you will have to use a serial port to load the factory bin.

Make sure you are using the proper loader for your viewsat and that it is properly configured.

1. Turn your viewsat off using the switch at the back of it. Then unplug it from the wall outlet.
2. Hook up stb to pc with proper cable and make sure there is no power to it.
3. Open loader 2.
4. Click on Open Files and select the bin you want.
5. Click on PC->STB and a window will open showing status and percentage.
6. Turn the receiver on and the bin will start to load.
7. Let it run all the way through until the led on the box blinks and then the box will reboot itself and the led will say 00:00 or display a channel number.
8. DO NOT shut down loader 2 when you see it saying "ok"
9. Manually turn the box off using the switch on it and then back on. The led will display 00:00 or a channel number.
10. You can NOW shut down loader 2.
11. Connect your box to the tv, making sure that you plug it into the wall outlet "last"
12. Double check your installation settings and make sure everything is as it should be.
13. It may take some time for chans to come in but they will then yu can watch tv.

Using USB Method:

To load the ultra get new bin file first unzip to desktop put in your usb flash then copy new bin from desktop and copy to stick. use remove safely on pc and then load in your ultra.

Night Rider Lights are 4 little dashes like this - - - -

At steps 5 and 6. Reverse the order. Turn the receiver on and just as you see the led on your receiver flicker press the PC->STB. You may have to try this more than once.
You will then have to reload latest factory bin, latest bin, do your installations all over again for sat setup, keys etc. DOUBLE CHECK ALL your installation settings. If you are using a vs ultra and reloading a factory bin you will have to use the serial cable.